School of Forest Resources

Douglas J. Gardner – Selected Publications

*Alrubaie, MAA, RA Lopez-Anido, DJ Gardner, M Tajvidi, Y Han. 2019. Experimental investigation of the hygrothermal creep strain of wood–plastic composite lumber made from thermally modified wood. Journal of Thermoplastic Composite Materials 0892705718820398

*Alrubaie, MAA, RA Lopez-Anido, DJ Gardner, M Tajvidi, Y Han. 2019. Modeling the hygrothermal creep behavior of wood plastic composite (WPC) lumber made from thermally modified wood. Journal of Thermoplastic Composite Materials 0892705718820404

*Sun, W, M Tajvidi, CG Hunt, G. McIntyre and DJ Gardner 2019. Fully Bio-Based Hybrid Composites Made of Wood, Fungal Mycelium and Cellulose Nanofibrils. Scientific Reports 9:3766 | https://doi.org/10.1038/s41598-019-40442-8

*Ghasemi, S., M. Tajvidi, D. W. Bousfield and D. J. Gardner. 2018. Reinforcement of natural fiber yarns by cellulose nanomaterials: A multi-scale study. Industrial Crops and Products 111:471-481. https://doi.org/10.1016/j.indcrop.2017.11.016

Gardner, D. J. 2018. Theories and Mechanisms of Adhesion. In: Handbook of Adhesive Technology Third Edition, A. Pizzi and K. L. Mittal, Eds. CRC Press, Boca Raton, FL pp. 3-18. ISBN 9781498736442

*Darmawan, W., D. Nandika, E. Noviyanti, I. Alipraja, D. Lumongga, D. Gardner, and P. Gérardin. 2018. Wettability and bonding quality of exterior coatings on jabon and sengon wood surfaces. Journal of Coatings Technology and Research 15(1):95-104. https://doi.org/10.1007/s11998-017-9954-1

*Gardner, D. J. and A. Bozo. 2018. Ten-year field study of wood plastic composites in Santiago, Chile: Biological, mechanical and physical property performance. Maderas. Ciencia y Tecnologia 20(2): DOI:10.4067/S0718-221X2018005000021

*Wang, L. and D. J. Gardner. 2018. Contribution of printing parameters to the interfacial strength of polylactic acid (PLA) in material extrusion additive manufacturing. Progress in Additive Manufacturing https://doi.org/10.1007/s40964-018-0041-7 Published online: 19 April 2018

*Wang, L., Gramlich, W. M., Gardner, D. J., Han, Y., & Tajvidi, M. (2018). Spray-Dried Cellulose Nanofibril-Reinforced Polypropylene Composites for Extrusion-Based Additive Manufacturing: Nonisothermal Crystallization Kinetics and Thermal Expansion. Journal of Composites Science, 2(1), 7.

*Wang, L., Kiziltas, A., Mielewski, D. F., Lee, E. C., & Gardner, D. J. 2018. Closed-loop recycling of polyamide12 powder from selective laser sintering into sustainable composites. Journal of Cleaner Production 195:765-772.

*Ghasemi, S., M. Tajvidi, D. J. Gardner, D. W. Bousfield and S. M. Shaler. 2018. Effect of wettability and surface free energy of collection substrates on the structure and morphology of dry-spun cellulose nanofibril filaments. Cellulose https://doi.org/10.1007/s10570-018-2029-3 First Online: 07 September 2018.

*Etzler, F.M. and Gardner, D. 2018. Surface Free Energy Determination of Powders and Particles with Pharmaceutical Applications: A Critical Review. Reviews of Adhesion and Adhesives, 6(3):329-367. DOI: 10.7569/RAA.2018.097310

*Wang, L., J. Palmer, M. Tajvidi, D. J. Gardner, Y. Han. 2018. Thermal properties of spray-dried cellulose nanofibril-reinforced polypropylene composites from extrusion-based additive manufacturing. Journal of Thermal Analysis and Calorimetry https://doi.org/10.1007/s10973-018-7759-9

Gardner, D.J., J. Anderson, H. L. Tekinalp, and S. Ozcan. 2018. Lignocellulosic-filled polymer feedstocks for large scale additive manufacturing of low cost composites. In: Proceedings of the 5th International Conference on Processing Technologies for the Forest and Bio-based Products Industries (PTF BPI 2018) Freising/Munich, September 20-21, 2018, pp. 233-237.

Gardner, D.J., J. Anderson, H. L. Tekinalp, S. Ozcan, and P. Sauerbier. 2018. Lignocellulosic-filled polymer feedstocks for large scale additive manufacturing of low cost composites. In: Proceedings of the International Forest Products Congress Trabzon, Turkey, 26-29 September 2018, pp. 12-22.

*Sauerbier, P., J. Anderson and D. J. Gardner. 2018. Surface Preparation and Treatment for Large-Scale 3D- Printed Composite Tooling Coating Adhesion. Coatings 8, 457; doi:10.3390/coatings8120457

*Wang, L. and D. J. Gardner. 2017. Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene. Polymer 113:74-80. http://dx.doi.org/10.1016/j.polymer.2017.02.055

*Amini, E., M. Tajvidi, D. J.Gardner, and D. W. Bousfield. 2017. Utilization of cellulose nanofibrils as a binder for particleboard manufacture. Bioresources 12(2):4093-4110.

*Davids, W. G., N. Willey, R. Lopez-Anido, S. Shaler, D. Gardner, R. Edgar, and M. Tajvidi. 2017. Structural performance of hybrid SPFs-LSL cross-laminated timber panels. Construction and Building Materials 149:156–163.

*Wang, L., W. M. Gramlich and D. J. Gardner. 2017. Improving the impact strength of poly(lactic acid) (PLA) in fused layer modeling (FLM). Polymer 114:242-248.        http://dx.doi.org/10.1016/j.polymer.2017.03.011

*Horseman, T., M. Tajvidi, C. I. K. Diop and D. J. Gardner. 2017. Preparation and property assessment of neat lignocellulose nanofibrils (LCNF) and their composite films. Cellulose 24(6):2455-2468. DOI: 10.1007/s10570-017-1266-1

*Boran, S., A. Kiziltas, E. Erbas Kiziltas, D. J. Gardner and T. S. Rushing. 2017. Nanoclay reinforced polyethylene composites: Effect of different melt compounding methods. Polymer Engineering and Science 57(3): 324-334.

*Wang, L., D. J. Gardner and D. W. Bousfield. 2017. Cellulose nanofibril‐reinforced polypropylene composites for material extrusion: Rheological properties. Polymer Science and Engineering. http://onlinelibrary.wiley.com/doi/10.1002/pen.24615/full

Gardner, D. J., Y. Han, A. Kiziltas, and D. Mielewski. 2017. Mechanical properties of hybrid basalt-carbon fiber-filled recycled polypropylene and polyamide 6 composites. 17^th Annual SPE Automotive Composites Conference and Exhibition.

Gardner, D. J. 2017. Theories and Mechanisms of Adhesion in the Pharmaceutical, Biomedical and Dental Fields.  pp. 1-22. In: Adhesion in Pharmaceutical, Biomedical and Dental Fields. Edited by K. L. Mittal and F. M. Etzler, Scrivener Publishing, Beverly, MA